Tel: 012 645 1000 | Email: info@sciprofs.co.za

LABORATORY EQUIPMENT


Biobase

Auto Chemistry Analyzer BK-200


Model

BK-200mini( NEW BK-200)

Overall
Performance

Throughput : 200 Tests/hour

Analysis Method : End-point, Fixed-time, Rate(Kinetic)

Certificates : CE, FDA, ISO9001, ISO14001, ISO13485


Sample & Reagent System

Sample Positions : 37 sample positions

Reagent Position : 28 reagent positions

Sample Volume : 2~70ul

Reagent Volume : 20~350ul

Probe Washing : Automatic washing interior and exterior

Reagent Cooling : Refrigerated tray with independent switch


Reaction System

Temperature Control : 37+0.1℃, real-time monitoring

Cuvettes : 48 reusable cuvettes,optical length 6mm

Mixer Probe : Independent stirring

Washing : Automatic cuvettes washin

Auto Glassware washer 

Features:

*Two toughened glass doors , prevent cross infection .

*Color LCD touch screen , advanced programmable control system with six standard programs .

*High efficient cleaning system , with rotary nozzles in top ,bottom and among the shelves to make sure that the spray liquid can contact the surface of devices completely .

*High efficient drying system with HEPA filter , can clean and dry the inner of tubular things .

*Thermal disinfection , water heating system can make sure the water temperature keep above 93℃ to reach the international disinfecting efficiency level .

Auto Heamatology Analyzer 

Features:

①.Throughput 60T/H.       

②.14 inch touch screen.

③.Tri-angle laser scatter + flow cytometry method + impedance method for RBC and PLT counting.

④.3D holographic scattergram displays the accurate 5 part differentiation of WBC.

⑤.Large storage capacity:  100,000 results(including histogram, scattergram, patient information)

Benchtop Conductivity/TDS/Salinity Meter

Features:

* Multi-parameter conductivity meter contains the TDS, salinity and resistivity

measurement modes.

* 1 to 5 points calibration with automatic calibration solution recognition.

* Selectable cell constant ( 0.1/1/10 ), normalization temperature ( 20°C or 25°C ),

* TDS conversion factor, seawater and practical salinity measurement modes.

* Linear or pure water compensation improves the measurement accuracy.

* Automatic Temperature Compensation ensures accurate reading.

Benchtop  PH Meter

Features:

Economical benchtop pH meter is equipped with a white backlit LCD display.

* Automatic electrode slope display helps user decide whether to replace sensor.

* Automatic Temperature Compensation ensures accurate measuring result.

* 2 points push-button calibration with auto-buffer recognition.

* Selectable temperature unit (°C or°F ) meets different application requirements.

* Help message as a operational guide that helps you quickly begin using the meter.

* System menu allows setting the 5 parameters, including the pH buffer standard,

number of calibration points, auto-power off, etc.

Centrifuge

Feature:

 

model: LC-HD

Handle-centrifuge can use for chemical,

biological laboratories and hospital

laboratories.

Capacity: 4*15ml

Packing size: 210*100*50mm

Gross weight: 1.6kg

COD Analyzer

Features:

Model

BK-COD1

Measuring Principle

Dichromate colorimetric method

Range

COD

0.0~1500mg/L

Electrolysis Current Divide

Accuracy

Basic Accuracy

≤150mg/L:±8% reading ±1mg/L; ≥150mg/L:±8% reading

Repeatability

3%reading

Stability

±2%(reading )/15min

Calibration

Two-point calibration(zero and full scale calibration)

Data Storage

200 data with time-and-date stamp

Digital Viscometer BKU-1

Features:

BKU-1 series viscometer is specially applied to sample like paint, coating, etc.

*Central control circuit: 16 bit MCU

* It can recyclingly show the units of KU, gm, and cP.

* LCD Display.

Freeze Dryer Table Type

Features:

1.LCD touch screen.

  1. With historical data inquiry function.
  2. With USB interface to export the data.           
  3. Large capacity ice condenser trap and without coil inside.
    5. With cascade refrigeration technology.
    6. Pre-freezing shelf can be used as guide barrel to speed up the drying rate.
    7. Ice condenser trap and operation panel are made by stainless steel.
    8. Drying chamber is transparent which is visual and safe.
    9. Shelves are stainless steel, which can be adjustable per the requirements.

Laboratory Refrigerators

Feature:

laboratory Refrigerator is specialized refrigerating equipment for cold storage of pharmaceuticals as well as biological products and so forth.

It is suitable for hospital, drugstore, pharmaceutical factories, sanitation and antiepidemic station and clinics.

LaboratorBiological Microscope

Features:


Note:110V/220V for LED lamp ,220V only for Halogen lamp 

Optional:2.0,3.0 or 5.0 Megapixel, CMOS electronic eyepiece

Medicine Stability Test Chambers

Features:

P.I.D accurate and reliable temperature and humidity control.

* Built-in fan to form air circulation and improve temperature uniformity insidethe cabinet

* Built-in water tank and automatic water replenishment interface, when there is no humidification water, automatically disconnect the heater power

* StandardAccessory include:Micro thermal printer

* Optional:USB port, Stylus printer ,External temperature protection device

Portable PH/ORP Meter

Features:

1 to 5 points push-button calibration with auto-buffer recognition.

* Automatic electrode slope display helps user decide whether to replace sensor.

* Automatic Temperature Compensation provides accurate measured values.

* Calibration Due Reminder prompts you to calibrate the meter regularly.

Refractometer

Features:

* Cloud service system, connecting cloud database with instruments.

* 7”LCD touch screen and innovative WINDOWS software interface. 

* 2 USB ports, RS232 port and internet port for connecting printer or internet, U disk and SD card port for data exporting.

* Perfect measuring prism

Measuring prism is made of high hardness sapphire glass, of excellent properties against corrosion and scratches, free for clean and durable.

* Ultra long life light source

It adopts High brightness LED lights with service life exceeding 100000 hours

* Auto temperature control system

UV Lamp

Handheld UV Lamp
Application: The handheld UV lamp irradiate the single-cell microorganisms such as cells and viruses with UV light to destroy the structure of DNA in the center of their lives, so that the proteins that make up this organism cannot be synthesized, causing them to immediately die or lose their ability to reproduce. Under normal circumstances, UV light irradiation for more than 10 seconds can achieve the effect of sterilization. It is suitable for the sterilization and disinfection of computer keyboards, tablet PC, mobile phones, desktops, door handles and kitchen utensils.

Bench UV Lamp
Introduction: It is a low-pressure mercury lamp. The lamp tube is made of pure quartz glass, which is intensified by low-pressure mercury vapor (<10-2Pa) and emits UV rays with a wavelength of 253.7nm and 185nm. Quartz glass has a high transmittance of UV rays, reaching more than 90%, and has sufficient strength Energy UVC can be used for disinfection and sterilization in various fields.

Portable UV Lamp
Introduction: It mainly acts on the DNA of microorganisms, destroys the DNA structure, and makes it lose the functions of reproduction and self-replication, so as to achieve the purpose of sterilization and disinfection.

Vertical Autoclave

Features: * Standard built-in printer.

* Deionized water interface for supplying steam generator.

* Rapid water cooling system for efficient and safe sterilization of liquids.

* With a quick maintenance window, the electrical parts can be repaired without removing the cover.

* Microcomputer control. Fully automatic control water injection, temperature rise, sterilization, exhaust and dry.

* LCD screen display shows pressure, temperature, time and error codes and operation curve etc.

Water Purifier (Automatic RO/DI Water)

Features:

Automatic RO membrane anti-fouling program.

*Material:body case adopt plastic spraying.

*Cartridge injection mold technology, built-in chassis.

*Double electric water intake, two kinds of water quality, ready-to-use. 

*Electrical and water separation,avoid circuit failure due to moisture or water leakage.

*Water quality online monitoring system can measure the quality of produced water immediately.

*Equipped with a portable TDS pen,the TDS content,conductance and water temperature can 

be measured anytime.

Adam Equipment

Analytical Balances

For many laboratory applications, a balance with a high level of precision is essential for weighing samples. Adam Equipment’s analytical balances provide readabilities to 0.1mg and can perform tasks such as formulation, density determination, purity analysis and conformance testing.

Suitable for laboratories of all types and sizes, Adam’s analytical balances feature a compact footprint, so they occupy minimal space on crowded lab workbenches. These balances offer a host of features to simplify even the most complex weighing applications. Adam analytical balances are equipped with weighing chambers to improve precision and ensure consistent results.

Bench & Floor Scales

Simple to operate and versatile, CPWplus series includes bench scales, platform scales and wheeled scales. Models offer durable construction, and are available in a selection of stainless steel platform sizes. CPW plus is suited for many types of weighing in the field, warehouse or lab, such as food processing, shipping and receiving, materials testing or veterinary use.

Calibration Weight

Adam’s OIML weights are available in sets or separately. Individual weights are packaged in a plastic box, while weight sets are placed in a lined aluminum box, complete with forceps and white cotton glove.

Compact Balances

CB balances can manage most small tasks, such as measuring compounds in chemistry classes, portioning at food service establishments, or weighing small animals. Compact and portable, the CB transports easily to the field, or from bench to bench in a science classroom. The CB is powered by battery or an optional AC adapter.

A sealed keypad and one-piece housing make the CB simple to clean, and help protect internal components from dirt and spills. The grade 304 stainless steel pan can be wiped down quickly and accommodates either single items or bulk powders.

Moisture Analyzer

With simple operation and rapid response time, PMB moisture analysers offer the top value in their class. The automatic test-setting function enables easy recall for frequent testing of the same items without additional user programming. USB and RS-232 interfaces provide computer and printer connections to store test programs and results. No additional software is needed to take readings, giving users total freedom to collect data on a production floor or in the field. A single 400-watt halogen bulb heats samples in 1 °C selectable increments. Three heating options give users the flexibility to customise test methods and temperatures for different materials.

Platform Scales

PT industrial scales offer durability and quality construction for a variety of different applications. The PT features a large, steel base with a diamond plate surface, adjustable levelling feet and cable. Optional ramps facilitate loading and unloading heavy objects. The platforms are available with or without indicators. Adam offers a range of indicators, including the GK, GC and AE 402.

Precision Balances

Durable and reliable, Nimbus precision balances deliver a full breadth of readabilities ranging from 1mg to 0.1g. Innovative design enables a compact footprint, so it occupies minimal space but retains a high level of performance. The single-piece construction offers greater stability, producing highly repeatable results. The weighing sensor in the Nimbus is crafted from a single block, and contains fewer parts than a traditional force motor balance. This optimised internal mechanism is fabricated using hardened materials, helping the Nimbus tolerate rigorous laboratory use. Efficiency in the mechanics, plus improved processing power of the electronics, leads to excellent performance.

Anti-Vibration Table

Anti-Vibration Table – Ergonomically styled, the AVT offers a solid, stable surface developed specifically to help decrease vibration during measurement. When used in tandem with a balance, the table allows the balance to perform with marked precision, despite air currents or movements that might cause readings to fluctuate. The AVT is easy to assemble, with all necessary tools supplied. The internal working surface measures 400 X 450mm, allowing ample space for a balance. Its large, scratch-resistant dark granite slab sits on shock-absorbing rubber mounts, while leveling feet accommodate uneven surfaces. The balance fits in the middle of the AVT’s granite surface, stabilizing the base and enabling greater precision

  • The anti-vibration table from Adam equipment offers a solid, stable developed specifically to help decrease vibration during measurement.
  • When used in tandem with a balance, the table allows the balance to perform with marked precision, despite air currents or movements that might cause readings not to be stable.
  • The antivibration is easy to assemble, with all necessary tools supplied.
  • The internal working surface measures 400x 450mm, allowing ample space for a balance.
  • Its large, scratch-resistant dark granite slab sits on shock-absorbing rubber mounts, while leveling feet accommodate uneven surfaces. The balance fits in the middle of the AVT’s granite surface, stabilizing the base and enabling greater precision.

Features

  • Two-table construction keeps the granite slab in the middle and reduces interference
  • Large work surface of 400 x 450mm
  • Scratch-resistant granite slab
  • Black laminated table top provides ample work surface for resting samples or documents
  • Lightweight tubular aluminium frame
  • Adjustable levelling feet for uneven surfaces
  • Polished finish is easy to clean
  • Total weight of table and work surface 55kg

Specifications

  • Net Weight 55kg

Dimensions Overall 800x600x782mm (wxdxh)

Scientific Engineering

Furnaces

• Electronic P.I.D temperature control with digital indication of set and process value

• Solid state switching for improved reliability

• Independent overtemperature safety system

• Independent sensors for control and safety using type n duplex thermocouple

• Maximum continuous operating temperature 1150°C

• Easily replaceable side wall mounted slab elements.

• Automatic cut out on door opening, deactivates element

• Door mounted temperature sampling port for easy validation thus retaining heat inside the chamber

• Robust construction with slide out control panel for ease of service.

• Available in 9 litre and 30 litre capacity

• Optional programmable controllers

• High thermal efficiency ceramic insulation coupled to double skin construction ensures cool to touch exterior panels

• Out and up door with vertically counterbalanced action protects operator from potential burn

• Ashing option available

Glassware Drier

Grade 304 stainless steel body construction

•    Reliable incolloy heating elements

•    Unit provided with 2 chrome plated wire shelves

•    Toughened glass sliding doors on both sides for ease of access

•    Variable heat control via energy regulator

Growth Chamber

•           Electronic P.I.D temperature control with digital indication of set and process value

•           Fully adjustable day/night and temperature time settings

•           High accuracy pt. 100 temperature sensor

•           Solid state control relay for optimum reliability

•           Reliable refrigeration system with high quality compressor and components

•           Grade 304 stainless steel interior

•           Temperature range 0°C to +60°C

•           Supplied with 2 chrome plated wire shelves

•           Fully adjustable shelf heights

•           Forced air circulation for excellent temperature uniformity

•           Inner glass viewing door for sample inspection without affecting chamber temperature

•           High quality silicon door seal to minimise heat loss

•           Refrigerant 134a

•           Independently controlled lighting allowing the selection of different lux levels via a rocker switch

•           Automatic defrost function

•           Weekly programmable timer

Heatable Baths

•    Inner tanks are manufactured from grade 316 stainless steel for exceptional corrosion resistance

•    Grade 304 stainless steel optional lids

•    Reliable, high quality incolloy heating elements.

•    Heaters and sensors protected by a perforated removable diffuser to ensure even temperature distribution

•    Auxiliary heating element to assist in rapid heat up of bath if required

•    High density mineral wool insulation for minimum heat loss

•    Ideal for applications where lower temperature accuracy is acceptable

•    Hydraulic thermostat control operating temperature ambient +10°C to 199°C

Hot Plate

•    Heavy duty mild steel heating top with special coating

•    Mild steel body treated for long term resistance to corrosion with an epoxy powder coated finish

•    Unique body design to ensure maximum cooling airflow for the controls and wiring

•    Suitable for continuous operation

•    Variable energy regulator for optimum heat control

•     Pilot light for power indication

Industrial Ovens and Incubators

•    Grade 304 stainless steel interior

•    Fully adjustable shelf height

•    Doors mounted on robust hinges for effective sealing

•    Long lasting silicon door seal

•    All bodies are constructed from corrosion protected mild steel with an epoxy powder coated finish

•    Special purpose shelves or drying trays manufactured to customer specifications if required

Hydraulic safety thermostat and control circuit breakers fitted to all models

•    Electronic P.I.D temperature control with  digital indication of set and process value

•    Solid state switching for improved reliability•    High accuracy pt 100 temperature sensor

•    Ideal for applications where a higher degree of accuracy is required

•    Multi stage heating

•    Weekly programmable timer

•    Operating temperature ambient +7°C to 250°C

Laminar Flow

•           Available with panelyte or stainless steel worktops to suit the application

•           Robust mild steel construction with epoxy powder coated finish

•           Toughened glass 10mm thick side windows

•           Easily replaceable prefilter grade G4.

•            HEPA filter EN1822 standard H14 quality

•           Units comply with U.S. standard 209 E class 100

•           Lighting to 1000 lux

•           Control panel with fan speed control, and 10 amp plug socket.

•           Differential pressure gauge to continually monitor filter condition

Magnetic Stirrer

For controlled heating and stirring

•    Reliable incolloy heating elements

•    Temperature range 50°C – 350°C

•    Reliable solid state electronic speed control

•    Stirring bar 40 x 8mm

•     RPM: 100 – 1800

Overhead Stirrer

• Easy to set digital control with rotating knob

• Plate size 200mm x 300mm

• Solid state electronic speed control

• Removable stirrer bar for easy cleaning

• RPM 100 – 2500

• Adjustable height and angle via clamping bar

Shakers

•           Micro processor based speed control for high stability with digital indication of r.p.m.

•           120 minute timers with infinity override position for continuous operation if required

•           Electronic P.I.D temperature control with digital indication of set and process value

•           High accuracy pt 100 temperature sensor

•           Standard unit supplied with platform (size 400mm x 300mm) and 4 adjustable clamping bars

•           Loose rubber mat fitted to platform

•           Counterbalanced drive system ensures smooth running under all loads

•           8kg load capacity

•           Viewing window mounted in lift up cover

•           Door opening safety cut out switch stops the platform when the lid is opened

•           Temperature range ambient ±7°C to 60 °C

•           Flask holding clamps available as accessories

Steam Baths

•    Easily replaceable high quality incolloy heating element for long and reliable use

•    Manual reset safety thermostat protects the element should the bath run dry

•    Simple device for automatic control of water level

•    Flask openings 31mm, 50mm, 70mm and 80mm diameter

•    Heat resistant, safe to touch lid knobs

Trolley

•    Supplied in knock down form

•     Units easy to assemble, instructions provided

•    100mm easy glide, silent running, heavy duty castors

•    Non marking tyres to ensure floors remain clean

•    Carrying capacity 50 kg per shelf

•    Stainless steel trays

•    Sturdy mild steel framework with scratch resistant epoxy powder coated finish

Ultrasonic Cleaning Baths

Can be used for emulsification, mixing and removal of oxidation from surfaces.Long lasting Stainless steel 304 tanks. Supplied with baskets and lids as standard. Units above 4 liter capacity are fitted with drain taps for easy maintenance. All models fitted with a 60 minute timer with bypass function. All models are fitted with a heating element with a maximum temperature capacity of 80°C. Variable frequency and power setting on all models




Labtron

Flash Point Testers

LCFP-A10 is compact, stand-alone closed cup flash point tester which determines the low-temperature operability in diesel fuel, biodiesel, blends and gas oils. It is designed as per “Test Methods for Flash Point of Petroleum Products (Pensky-Martens Closed Cup Methods)” ASTM D93.



Karl Fischer Auto Titrator

LWT-A20 is designed according to ASTM D6304 “Test Methods for Water Content of Liquid Petroleum Products (Karl Fischer Methods)” and ASTM D1744 standard to determine water content in the liquid petroleum products using Karl Fischer reagent. It is a multifunctional, convenient, and automatic analysis instrument.



Microwave Digestion System

Microwave Digestion System LMWD-A10 is designed for smooth operation experience with great value for money and are compact making it ideal virtually for any laboratory setting. It is programmable, easy to use, low maintenance unit with an exceptional feature of its outer material which is explosion proof making it safe for users.



TOC Analyzer

TOC Analyzer LTOC-A10 is designed to determine carbon content in Liquid and Gas samples by digesting it through wet chemical oxidation mode. LTOC-A10 is fully computer-aided equipment which helps in enhancing the performance.



Ultrasonic Cleaner

Integrated Industrial Ultrasonic Cleaner LIUC-A14 is a 135 L capacited unit integrated with industrial based transducer and a powerful ultrasonic generator providing efficient high level tabletop cleaning. With a cleaning duration of 1 ~ 99 mins efficient intensive cleaning of instruments and products is done making them contamination, rust and germ free. Its key feature is the variance of using it at 28 KHz for gross rinse to 40 KHz for intensive rinse



UV-Visible Spectrophotometer

UV-Visible Spectrophotometer LUS-B15 is a high sensitive double beam spectrophotometer with a wavelength of 190 to 1100 nm for absorbance spectra of chemical and biochemical compounds. Equipped with a bandwidth of 2 nm for peak resolution, it works on detection of light intensity between reference and test sample. The highly stable optics and silicon photodiode detector measures the sample and reference simultaneously optimizing the measurement accuracy. Built-in ARM system for high accuracy and low stability.



Vacuum Pump

Rotary Vane Vacuum Pump LRVP-A10 is designed with unique lubrication system, built-in oil pump and with a large oil volume capacity ranging from 0.5 L to 4.0 L. In addition to providing smooth, pulse-free air flow, these oil sealed rotary displacement pump are compact and easy to install and operate, have low starting and running torque requirements, produce minimal noise or vibrations and are capable of long, service-free life.



Viscometer

Viscometer LVM-B10 is used to determine a fluid’s internal flow resistance or viscosity. This viscometer has bright, easy to read LCD digital display. The viscometer is useful in any area that requires the study of flow of liquids properties. It is user-friendly, and portable in nature.



FTIR-Spectrometer

FTIR Spectrometer LIR-A10 is versatile, innovative, and intuitive, providing superior quantitative and qualitative information for routine analysis of solids, liquids, and gases. It has spectral range of 7800 to 350cm-1 and high S: N ratios and can provide SNR up to 15000:1.



Atomic Absorption

Atomic Absorption Spectrophotometer comprises of high performance and a wide spectral range photomultiplier tube. Incorporation of Czerny-Turner monochromator helps in selection of specific lights to allow determination of specific elements. It is equipped with gas leakage alarm which shutdowns the system as a safety measure. It is highly recommended spectrophotometer to analyze the smallest amount of element from the mixture, also in forensics and chemistry, biological science to detect toxic elements from blood and drug samples.



Cell Washing Centrifuge

Cell Washing Centrifuge LCW-A10 is a high-performance serofuge that can be used to perform cell-washing procedures safely and reliably. Steps are easy to monitor and easy-to-read digital LED display enables simple, user-friendly operation. It gives reproducible blood cell washing results up to 12 tubes per run.



Microscopes

Upright Metallurgical microscopes LMM-B11 with siedentopf trinocular head design, infinite optical system, reflected & transmitted Kohler illumination system meets performance demands of metal, plastic, electrical circuits & engineering industry. Its superior coaxial course and fine focusing tension adjustment knobs helps in better examination of samples.



Horizontal Autoclaves

Horizontal Laboratory Autoclave LHA-B10 is a microprocessor controlled automatic autoclave. It has a capacity of 150 L and a maximum working temperature of 134 °C. Equipped with safety features like automatic shutoff preventing overload of current, auto protection against raised temperature and pressure making a reliable and user-friendly device.



Density Meter

Density Meter LLDM-A10 is a unit that allows the data to be read directly with high measuring accuracy. It follows Archimedes principle of measurement. Measures volatile liquid, corrosive liquid, vicidity liquid, strong acid, and strong lye liquid quickly. Non cumbersome operation. It adopts the completed special windproof and dustproof cover, which makes the structure convenient and durable



CP Spectrometer

ICP Spectrometer LICP-A11 detects micro and macro elements using argon plasma with an analyzing rate of 15 elements per minute. Results can be achieved with lower levels of detection for qualitative and quantitative analysis. Detection of liquid flow from the spray chamber by optical drain sensor offers exceptional sensitivity and accuracy. Accurate signal-background ratio is attained by advanced control system.



Hanna Instruments

HI5221 Research Grade pH/ORP Meter, CAL CHeck

pH Specifications: 2.0 to 20.0 pH, -2.00 to 20.00 pH, -2.000 to 20.000 pH.

The HI5221 is an advanced research grade benchtop pH/mV meter that is completely customizable with a large color LCD, capacitive touch keys, and USB port for computer connectivity. The HI5221 is rich in features including five-point calibration, selectable resolution, data logging, alarm limits, comprehensive GLP, and much more. This meter retains simplicity with both dedicated keys for routine operation and virtual keys that guide the user through setup options.The HI5221 ensures confidence in measurements with the exclusive Hanna Instruments CAL Check™ feature that alerts the user to potential problems during calibration including if the buffer is contaminated or the probe needs to be cleaned.


Large Color LCD
CAL Check™
Capacitive Touch Keypad

HI83305-02 Multiparameter Photometer and pH meter

Specifications:

pH Range: Photometer: 6.5 to 8.5 pH
pH electrode: -2.00 to 16.00 pH
Oxygen, Dissolved Range: 0.0 to 10.0 mg/L (as O2)
Absorbance Range: 0.000 to 4.000 Abs
Aluminum Range: 0.00 to 1.00 mg/L (as Al3+)
Ammonia Range: Low Range: 0.00 to 3.00 mg/L
Medium Range: 0.00 to 10.00 mg/L
High Range: 0.0 to 100.0 mg/L (all as NH3-N)
Bromine Range: 0.00 to 8.00 mg/L (as Br2)
Chlorine Dioxide Range: 0.00 to 2.00 mg/L (as ClO2)
Free Chlorine Range: 0.00 to 5.00 mg/L (as Cl2)

HI83305 is a compact, multiparameter photometer intended for boiling and cooling tower applications for use in the lab or in the field. The meter is one of the most advanced photometers available with an innovative optical design that utilizes a reference detector and focusing lens to eliminate errors from changes in the light source and from imperfections in the glass cuvette. This meter has 30 different programmed methods measuring 18 key water quality parameters and offers an absorbance measurement mode for performance verification and for users that would like to develop their own concentration versus absorbance curves. Parameters specific to boiling and cooling towers include oxygen scavengers and silica which are important for maintaining equipment.
To save valuable laboratory benchtop space, the HI83305 doubles as a professional pH meter with its digital pH/temperature electrode input. Now one meter can be used for both photometric and pH measurements.

HI2003-02 edge®Dedicated Conductivity/TDS/Salinity Meter

Cond Specifications:  0.00 to 29.99 ?S/cm, 30.0 to 299.9 ?S/cm, 300 to 2999 ?S/cm, 3.00 to 29.99 mS/cm, 30.0 to 200.0 mS/cm, up to 500.0 mS/cm (absolute EC)

edge®’s groundbreaking design is the culmination of Hanna’s vision, design capabilities, integrated production, and world-class R&D. edge® is a single meter that can measure Conductivity, TDS and Salinity and is incredibly easy to use.

  • edge® EC/TDS/Salinity utilizes four ring conductivity probe technology that allows the user to measure samples from very low conductivity to very high conductivity.
  • edge® features a capacitive touch keypad that gives a distinctive, modern look. The keypad is sensitive enough to be used with laboratory gloves and has a fast response.

edge® features a 5.5” LCD display that you can clearly view from over 5 meters away. The large display and it’s wide 150° viewing angle provide one of the easiest to read LCDs in the industry.

HI8733 Multi-range EC Meter

Cond Specifications: 0.0 to 199.9 ?S/cm; 0 to 1999 ?S/cm; 0.00 to 19.99 mS/cm; 0.0 to 199.9 mS/cm

The HI8733 is a durable, portable EC meter designed for use in areas of production and quality control. It is supplied with a four-ring conductivity probe to allow for four ranges of measurement. Conductivity readings are adjusted with Automatic Temperature Compensation (ATC), assuring users of consistent and accurate measurements.

  • Four-ring probe
  • Four measuring modes
  • Automatic Temperature Compensation

.

Portable Turbidity Meter

NTU reading

Rounded to nearest

0.0 – 1.0

0.05

1 – 10    

0.1

10 – 40  

1

40 – 100

5

100 – 400

10

400 – 1000  

50

>1000   

100

 

The HI98703 Precision Turbidity Portable Meter is specially designed for water quality measurements, providing reliable and accurate readings, especially in the low turbidity range. The instrument is based on a state-of-the-art optical system which guarantees accurate results, assures long term stability, and minimizes stray light and color interferences. Periodic calibration with the supplied standards compensates for any variations in intensity of the tungsten lamp.  The 25 mm round cuvettes composed of special optical glass guarantee the repeatability of turbidity measurements.

Benchtop Turbidity Meter

Turbidity Specifications: 0.00 to 9.99 FNU, 10.0 to 99.9 FNU, 100 to 1000 FNU

The HI88713 Precision ISO Turbidity Benchtop Meter is specially designed for water quality measurements, providing reliable and accurate readings, even within low turbidity ranges. The instrument is based on a state-of-the-art optical system which guarantees accurate results, assures long term stability, and minimizes stray light and color interferences. Periodic calibration with the supplied standards compensates for any variations in intensity of the tungsten lamp. The 25 mm round cuvettes composed of special optical glass guarantee the repeatability of turbidity measurements.

.

Karl Fischer Coulometric Titrators

The HI933 is an automatic volumetric Karl Fischer titrator with HIGH accuracy, great FLEXABILITY, and REPEATABILITY.

The titrator is designed to perform titrations for a variety of samples types/matrices, allowing the USER to obtain both good results and high-speed analysis. The HI933 analyzes for water content ranging from 100 ppm to 100%. This powerful titrator automatically dispenses the titrant, detects the endpoint, and performs all necessary calculations and graphing.

Small footprint, requires minimal bench space

Casing made with strong, chemically resistant plastic

Powerful built-in algorithms for termination criteria based on fixed mV endpoint or absolute/relative drift

Titrant standardization and sample analysis averaging

Minimized water vapour entry the sealed Solvent System

Balance interface for automatic methods

User-customizable reports

Clearly displaying warning and error messages.

COD/multiparameter photometer

The HI83224 COD Meter and Multiparameter Photometer for chemical oxygen demand (COD) and specific ion measurement combines accuracy and ease of use in an ergonomic benchtop design. This meter is one of the most versatile photometers in the market, offering 15 measurement methods for different parameters including COD using ready-made liquid or powder reagents. The HI83224 has many advanced features including barcode recognition of sample vials, a graphic LCD to display various chemical forms, and a step-by-step tutorial mode for inexperienced users.

  • 15 MEASUREMENT METHODS INCLUDING COD
  • USB FOR DATA EXPORT
  • BARCODE READER

 

HI93754A COD (LR) Reagent Vials (0 to 150 mg/L)

The HI93754A-25 or HI93754A-150 are barcode reagent vials that follow the EPA approved method for the low range determination of chemical oxygen demand (COD) using a compatible benchtop photometer. These high quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each box for traceability.

Pre-dosed reagents for ease of use

Supplied with certificate of quality

Marked with expiration date and lot number for traceability

 

Bioevopeak

Seed Counter, BSCT-1

Description

Suitable for corn, rice, wheat, rape, vegetables and other seeds. It has an automatic sample separation function.

 

Advantages

7-inch color touch screen to guide the operation process.

Record content: time, total number of grains, number of samples.

Adjustable speed: stepless speed regulation.

Turntable operation: automatic, jog, manual three can be converted.

 

Specifications

Number of containers   8 cups

Setting range     1-500 tablets / cup

Electricity             220VAC/50~60Hz

Counting range 0~9999

Sample size        Φ0.5~10mm

Counting speed Maximum speed of 1000 to 2000 particles / minute (depending on particle size)

Feeder Electromagnetic type

 

Semi-Micro Analytical Balance, BMA Series

Description

  1. Electromagnetic force recovery weighing system
  2. Highly integrated load cell
  3. Recipe database: can store 99 recipes, each recipe contains up to 20 ingredients
  4. Large graphic display, easy and efficient operation
  5. Multiple languages are supported: English, German, French, Italian, Spanish, Portuguese
  6. Record the saved weight value in GLP/ISO format, including date, time, and serial number
  7. Large windshield glass cover, with 3 sliding doors, easy to operate the items to be weighed
  8. Keyboard plastic protection

 

Specifications

Model   BMA1265             BMA2285             BMA22105          BMA125               BMA165               BMA205

Max. capacity(g)               62g/120g              82g/220g              102g/220g           122g       162g       202g

Readability(mg)                0.01mg/0.1mg   0.01mg

Min Weighing(mg)          0.06mg

Stable Time        ≤6s

Display  LCD(white back light with black font)

Pan Size               Φ80mm

Operation Temp               5-25℃ 20-80% humidity

Repeatability     0.03mg/0.1mg   0.05mg/0.1mg   0.05mg 0.05mg

Linearity               ±0.08/±0.2mg    ±0.1/ ±0.2mg     ±0.1mg ±0.1mg

Draft Shield Size               152mm×160mm×225mm

Cal.weight           Internal Calibration

Option  Printer

Package               345×215×345mm

G.W./N.W.         8.25kg/5.8kg      8.3kg/5.85kg

IONISER               Option  Standard

Language             Italian/English/Portuguese/German/France/Spanish

Packing Size        510x400x620mm(No pallet)

Power Supply    110-230V 50/60Hz Out DC 12V 1A

Related products

 

Medical Cooler Box with 6 Ice Packs, 18L,30L,55,66L

1.Delicate design and durable material.

2.With the good performance of insulation layer,it can keep the cold life more efficiency.

Shaker, Microplate Type, SHK-M4II

Description

SHK-M4II Shaker for Microplates is a type of high speed shaker, which is with brushless DC motor and microprocessor controlled technique, specially for Elisa plates (96/384 wells), tissue culture plates (24/48/96 wells).

Features:

1.LCD display system status and parameters.

2.Stable and reliable shaking.

3.Easy to operate with one touch knob.

4.Automatic fault detection and buzzer alarm function.

Specifications

Model Parameter            SHK-M4II

Time range         1min ~ 99h59min

Speed range      200~1500rpm

Mixing orbit        3mm

Speed step value             10rpm

Sample capacity                4plates

Power   45W

Electricity             AC100V~240V 50/60Hz

Dimension (mm)              280×270×110

Weight (kg)        4.0

 

Electric Blood Collection Chair, BCC-E180A

Chair height: 520-670mm

Chair tilt angle: 8-15°

Back panel folding angle: -10-70°

Legrest folding angle: 20-75°

 

Rotary-vane vacuum pump, VACP-R Series

DESCRIPTION

VACP-R Series vacuum pump can be used either independently as main and can also be served as forepump for booster pump diffusion pump and molecular pump or as holding pump for a vacuum system and as a pre-pumping for different kinds of the pumps. So that is can be applied in electro-vacuum industries, vacuum flask manufacturing, vacuum welding and as an accessory to those fine gauges or meters where vacuum is required .It is more suitable for laboratory use because of its small size ,less weight and quiet operation

 

Small size, light weight, low noise

Equipped with a gas ballast valve, which can pump out a small amount of water vapor

Equipped with automatic anti-return oil double safety device

Small-caliber VACP-R2 and VACP-R4 vacuum pumps are specially equipped with vacuum drying ovens, freeze dryers, and printing machinery

Equipped with small diameter adapter and KF interface.

SPECIFICATIONS

 

Model   VACP-R1              VACP-R2              VACP-R4

Pumping Speed: L/S       1              2              4

Ult.Vacuum        Without gas        ≤6×10-2

ballast

Pa           With gas               ≤6.5       ≤1.33

ballast

Speed: r/min(50HZ)        1400       1400       1400

Power Required: Kw      0.25        0.37        0.55

Diameter of inlet port(mm)         16           25           25

Temperature rise of pump oil(℃)             ≯40        ≯45        ≯45

Oil capacity(L)    0.55        0.8          1

Overall Dimensions(mm)      467*130*254      488*145*280      528*145*280

 

Chemistry-design Diaphragm Pump, VACP-D410

1.Chemical Resistant Diaphragm Pumps

VACP-D410 diaphragm pump chemical resistant, diaphragm vacuum pumps that can be widely used to hard acidic, basic, and solvent vapors by utilizing corrosion-proof PTFE on all the wetted surfaces. Through innovative mechanical technology and human considerations, we have made the VACP-D410 to be quiet, safe, maintenance-free and cost-effective vacuum pumps.

2.High chemical resistant

All wetted parts of VACP-D410 series pump are made of PTFE material which can resist most of the corrosive gases.

3.No air pollution, maintenance-free

VACP-D410 pumps are driven by Diaphragm, without the need of lubricant, regular oil changes, and maintenance; with no oil pollution.

4.Quiet and low vibration

Driven direct by a motor with no additional belt-driven transmission; the quality vibration-proof assembly makes VACP-D410 run at the lowest noise level among all other equivalent pumps.

5.Thermal protection device

VACP-D410 pumps has a built-in thermal protection device to shut off the pump automatically when overheated and then resume working when the temperature cools down.

Application:

This anti-corrosion diaphragm vacuum pump is suitable for the treatment of corrosive gases in the chemical, pharmaceutical, petrochemical and other industries, such as suction filtration, vacuum distillation, rotary evaporation, vacuum concentration, centrifugal concentration, solid phase extraction, etc.

SPECIFICATIONS

VACP-D410

Power   115V/ 60Hz         220V/ 50Hz         Work Mode        Double

Max. power (W)               90           95           Outlet (mm)       10

Max. current (A)              1.4          0.5          Size WxDxH (mm)            294*156*195

Max. vacuum (mbar)      13           Weight (kg)        8.5

Max. Flow Rate 25           25           Noise Level (dB)               50

Motor Speed (rpm)        1700       1450       Order No.            169410

 

Diaphragm Vacuum Pump, VACP-D51

DESCRIPTION

No need for any working medium (no oil),no pollution. The air exchange chamber is equipped with filter materials to ensure the air

Adopt new technology and new materials in the production process. Easy to move and work smoothly, thus ensuring an ideal vacuum degree and a high air flow rate.

The special electricity motor is provided by the expert motor manufacturer ODM. Reasonable rotation design, equipped with an overheating power-off protector, will automatically power off when the pump body temperature reaches 130°C, and protect the motor from damage during long-term operation.

Adopt frictionless film movement, no heat generation, no friction loss. The diaphragm is made of imported rubber, which is corrosion resistant and has a long service life.

Automatic cooling and exhaust system, which ensures continuous operation for 24 hours.

The pressure adjustable design can meet the vacuum degree and gas flow rate within a certain range.

The bearing adopts imported classic bearings, with stable operation, low noise and high working efficiency.

The parts of the anti-corrosion pump in contact with gas are treated with Teflon surface treatment, which isresistant to chemical corrosion.

Small size, light weight, easy to move, saving laboratory space, convenient for repair and maintenance.

 

SPECIFICATIONS

VACP-D51

Pumping Speed (L/Min)                30           Pump  Head       1

Ultimate Vacuum             200mbar              Pump body Temperature (°C)    <55

Voltage 220Vac,50Hz       Dimension(L×W×H) (mm)            230x180x265

Power   160W     Weight(Kg)         7.5

Positive Pressure             ≥30Psi   Diaphragm          Imported Rubber

Air Inlet (mm)    φ6          Valve Plate         Imported Rubber

Air Outlet (mm)                φ6          Noise(BD)           <60

Operating Ambient Temperature (°C)    7-40       Note      Positive-negative pressure dual purpose

Optional accessory          Retention bottle

 

Rotary-vane vacuum pump, VACP-R Series

DESCRIPTION

VACP-R Series vacuum pump can be used either independently as main and can also be served as fore pump for booster pump diffusion pump and molecular pump or as holding pump for a vacuum system and as a pre-pumping for different kinds of the pumps. So that is can be applied in electro-vacuum industries, vacuum flask manufacturing, vacuum welding and as an accessory to those fine gauges or meters where vacuum is required .It is more suitable for laboratory use because of its small size ,less weight and quiet operation

Small size, light weight, low noise

Equipped with a gas ballast valve, which can pump out a small amount of water vapor

Equipped with automatic anti-return oil double safety device

Small-caliber VACP-R2 and VACP-R4 vacuum pumps are specially equipped with vacuum drying ovens, freeze dryers, and printing machinery

Equipped with small diameter adapter and KF interface.

 

SPECIFICATIONS

Model   VACP-R1              VACP-R2              VACP-R4

Pumping Speed: L/S       1              2              4

Ult.Vacuum        Without gas        ≤6×10-2

ballast

Pa           With gas               ≤6.5       ≤1.33

ballast

Speed: r/min(50HZ)        1400       1400       1400

Power Required: Kw      0.25        0.37        0.55

Diameter of inlet port(mm)         16           25           25

Temperature rise of pump oil(℃)             ≯40        ≯45        ≯45

Oil capacity(L)    0.55        0.8          1

Overall Dimensions(mm)      467*130*254      488*145*280      528*145*280

 

Manifolds Vacuum Filtration, Glass, MFA-6G/MFA-6PTFE

Specification:

6-branch

Glass funnel, glass filter head , PTFE sieve

Stainless steel valve

Stainless steel holder (SS316L)

 

Description

1.Glass funnel, glass filter head , PTFE sieve.

2.Stainless steel holder (SS316L)

3.Stainless steel valve

4.Stainless steel lid SS316L

5.Clamp of anodized aluminum.

 

Specifications

Catalog No.         Specification      Funnel  Valve     Support screen &Pore size          Connection         Holder

MFA-1G/MFA-1PTFE      1-branch              300ml Glass        SS           Glass/PTFE, 20pm            Ground joint      SS316L

MFA-1S                1-branch              SS316L  SS           SS316L, 100pm  Integral SS316L  SS316L

MFA-3G/MFA-3PTFE      3-branch              300ml Glass        SS           Glass/PTFE, 20pm            Ground joint      SS316L

MFA-3S                3-branch              SS316L  SS           SS316L ,100pm  Integral SS316L  SS316L

MFA-6S                6-branch              SS316L  SS           SS316L ,100pm  Integral SS316L  SS316L

MFA-6G/MFA-6PTFE      6-branch              300ml Glass        SS           Glass/PTFE, 20pm            Ground joint      SS316L

 

Operation

Attach the glass filter head on the SS holder (all SS filter manifolds have head and holder connected in one piece) and turn carefully to fit with the holder.

Put the membrane filter on the sieve , attach the funnel to the filter head , and attach the clamp .

Connect the rubber tube to the vacuum nozzle of pump , the other side to the collecting bottle .

Connect the rubber tube to the nozzle of the manifolds vacuum filtration , the other side to the nozzle of the collecting bottle.

Fill the solution into the funnel, open the valve and start up the vacuum pump . The solution flows through the membrane in the filter head through the holder into the collecting bottle due to the action of vacuum

 

Liquid Nitrogen Tank/Containers

Description

Product Overview

Portable storage series is an economical and practical small liquid nitrogen tank specially designed for biological samples that need to be stored regularly. The series is small in size and light in weight. It is made of high strength light aluminum alloy and contains multi-layer super-strong heat insulation layer. It realizes the safety, lightness and efficiency of the product and has many accessories to choose from.

Product Features

  1. High strength, light weight and small size aluminum structure;
  2. Equipped with belt;
  3. Ultra low evaporation loss;
  4. Number coding for canister place;
  5. Lockable lid is optional to prevent unauthorized open;

Specifications

Model

LNC-P2-30

LNC-P2-35

LNC-P2-50

LNC-P3-50

LNC-P6-50

LNC-P10-50

Performance

LN2 Capacity (L)

2

2

2

3

6

10

Weight Empty (kg)

2.8

2.6

2.7

3.1

4.8

6.1

Neck Opening (mm)

30

35

50

50

50

50

Outer Diameter (mm)

223

204

223

223

300

300

Overall Height (mm)

399

428

385

435

482

552

Static Evaporation Rate (L/day)

0.07

0.08

0.1

0.12

0.12

0.12

Static Holding Time (day)

28

24

20

26

52

86

Maximum Storage Capacity

Canister Diameter (mm)

19

25

38

38

38

Canister Height (mm)

120

120

120

120

120

Number of Canisters (ea)

3

3

6

6

6

Straws Capacity (120 mm canister)

0.5ml (ea)

90

165

792

792

792

0.25ml (ea)

204

330

1788

1788

1788

Straws Capacity (276 mm canister)

0.5ml (ea)

0.25ml (ea)

 

Automatic Glassware Washer and Dryer, 120L, 220L,320L

  1. General requirements

1.1 The spraying of cleaning water and the dissolution and stripping of cleaning solution can assist in cleaning the inorganic residues (such as lead, mercury, cadmium, arsenic, etc.) and organic residues (such as industrial dyes, hormones, grease, dust, etc.) of laboratory glassware or plastics.

1.2 The organic residue after cleaning is less than 0.1mg/L, and the metal ion residue is less than 0.02mg/L. The provincial authoritative experimental report or certification on the cleaning effect must be provided. In order to ensure the accuracy of the experimental results of trace analysis, the equipment has passed ISO9001, CE and other relevant international authoritative certifications.

1.3 The power supply voltage is 220V.

  1. Structural design

2.1 Double-layer detachable heat insulation and sound insulation shell, the inner cavity is made of 316L stainless steel, and the outer shell is made of 304 stainless steel.There are no exposed screws and rivets on the outside.

2.2 The height of the equipment is 110cm, which can be embedded in the test bench, the length and width are less than 75cm, and it occupies a small area.

2.3 There are two layers of cleaning racks in the cleaning cabin, which can clean 420 liquid phase auto sampler vials or test tubes, colorimetric tubes or 72 volumetric flasks, beakers, conical flasks, etc. at a time.

2.4 Internal foaming double-layer metal door is adopted to effectively insulate and reduce energy consumption.

2.5 It has two water inlets, which can be connected to tap water and pure water at the same time, and which water needs to be entered can be selected through the operation of the control panel.

  1. Control system

3.1 Microcomputer control system and color LCD screen are adopted. The tilt angle design of the operation screen conforms to the principle of ergonomics. It is easy to operate and has better user experience.

3.2 The control screen has a full Chinese operation interface, and both operations and alarms are prompted in Chinese.

3.3 The control system has 12 standard cleaning procedures and 99 custom cleaning procedures, which can be set and adjusted for different utensils and requirements.

3.4 “Black box” function, built-in data memory, the whole process of recording the cleaning status of each step, the system has self-diagnosis function, fault information prompt function;

  1. Cleaning system

4.1 The cleaning water pump is a professional European original imported circulating pump. Its water output is 800L/min, the water output is large, and the scouring force is large. The circulating pump fan blades have been treated with high temperature resistance and can work normally under the disinfection water temperature (above 93 ℃).

4.2  The cleaning cabin adopts the water supply structure of parallel water supply and water inlet at the back, instead of the structure of water inlet at the top and one-way water supply at the center. Water inlet from the side, and there is no need to find the water receiving port, convenient access, and the joint is not easy to be damaged.

4.3 The cleaning rack adopts the structure of water inlet in the back and water distribution in the central part. The central part divides water, and the cleaning rack connects the water to the middle part and distributes the water evenly to each spray column to ensure that each spray column discharges water evenly and cleans the utensils uniformly.

4.4 The spray columns of the cleaning rack shall be distributed in parallel rather than around the center, so as to ensure the consistent distance between each spray column and facilitate the placement and estimation of utensils while increasing the cleaning amount.

4.5 The cleaning rack does not have a tall central water inlet pipe, which saves space and is convenient to place; the upper and lower floors of the cleaning rack can be interchanged to facilitate the arrangement of utensils.

 

4.6 The cleaning cabin has a built-in double-layer 360-degree rotating spray arm, and the nozzle adopts a fan-shaped nozzle design, which sprays a fan-shaped water curtain with large scouring force and no dead ends. No simple small hole nozzle is used to reduce the dead angle of external spraying.

4.7 The glassware washer adopts an automatic heating system during cleaning, and the heating temperature is adjustable. The maximum temperature can reach 93°C, reaching the disinfection level.

4.8 The cleaning solution and neutralization solution are automatically added by two peristaltic pumps, and the added dosage can be set.

  1. Safety protection

5.1 Safe door lock design, the door body is locked and cannot be opened during the cleaning process, preventing water spraying and scalding caused by misoperation; It has the function of emergency door opening, which can quickly open the door and take out the utensils after power failure.

5.2 It has a complete protection function, with a lack of cleaning agent alarm, the main washing pump over-temperature protection function, heating and anti-dry function, the main washing pump idling protection function, water level sensor detection function, cleaning chamber over-temperature protection function, all have Chinese prompt and alarm reminder.

5.3 It has the function of program self-checking and equipment self-cleaning, which can perform self-checking on the set program. After cleaning, the equipment can also be automatically cleaned to reduce residues.

 

Specifications

Model   LWD-200I

The volume of the cleaning chamber      ≥200L

External dimensions       607×730×1050

Power supply (V/HZ)      220V/50Hz

Water cleaning power   ≤0.75KW

water heating power     ≥3KW fast heating

drying power     ≥2.1KW

air volume           ≥120L/M3

Water temperature control         room temperature to 99℃

Standard configuration  2 cleaning racks

Equipped with 2.5L each of imported cleaning fluid and neutralizing fluid

 

Dissolution Tester, DIST-3, 6, 8, 12

Speed range: (20~200)rpm

Speed accuracy : ±2rpm

Temperature range ambient to : +45.0℃

Temperature Stability : ±0.3℃

 

Description

DIST series of instruments are used for detecting velocity and extent of pharmic dissolution from tablet, capsule etc in prescriptive menstruum.

 

Features:

1、It has eight vessels and six poles, with six vessels and six poles in front and other two vessels at back.

2、The head part of the instrument can be artificially turned over smoothly and flexibly.

3、The basket units and paddle units are made of imported stainless steel (SUS316L).

4、The magnetism-pumped circular water current can heat the system evenly, and the bath liquid can achieve an equal temperature.

5、A MPU is used in dissolution tester to automatically control the temperature, rotational speed and time, and the parameters can be preset at any time.

6、It can be operated conveniently by keystroke. The measurement result is displayed by LCD. The preset and real data can be displayed alternately in time.

7、Automation: auto-test, auto-diagnose, auto-alarm.

8、It can test by self and alarm automatically. The dissolution parameters of’ Chinese codex 2010′ are stored in and can be taken out at anytime.

9、Time can be preset at many points. The beeper sounds automatically to any point, and then the tester automatically runs to the next one.

 

Specifications

  • Speed range (20~200)rpm
  • Speed accuracy ±2rpm
  • Temperature range ambient to +45.0℃
  • Temperature Stability ±0.3℃
  • Preset timing nine points (1~999)min
  • Time accuracy ±0.5mm
  • Paddle radial run-out ±0.5mm
  • Basket radial run-out ±1.0mm
  • Electricity 220V/50Hz/1200W or 110V/60Hz/1200W
  • Dimension (960*440*480)mm3

 

Flash Point Testers

LCFP-A10 is compact, stand-alone closed cup flash point tester which determines the low-temperature operability in diesel fuel, biodiesel, blends and gas oils. It is designed as per “Test Methods for Flash Point of Petroleum Products (Pensky-Martens Closed Cup Methods)” ASTM D93.



Karl Fischer Auto Titrator

LWT-A20 is designed according to ASTM D6304 “Test Methods for Water Content of Liquid Petroleum Products (Karl Fischer Methods)” and ASTM D1744 standard to determine water content in the liquid petroleum products using Karl Fischer reagent. It is a multifunctional, convenient, and automatic analysis instrument.



Microwave Digestion System

Microwave Digestion System LMWD-A10 is designed for smooth operation experience with great value for money and are compact making it ideal virtually for any laboratory setting. It is programmable, easy to use, low maintenance unit with an exceptional feature of its outer material which is explosion proof making it safe for users.



TOC Analyzer

TOC Analyzer LTOC-A10 is designed to determine carbon content in Liquid and Gas samples by digesting it through wet chemical oxidation mode. LTOC-A10 is fully computer-aided equipment which helps in enhancing the performance.



Ultrasonic Cleaner

Integrated Industrial Ultrasonic Cleaner LIUC-A14 is a 135 L capacited unit integrated with industrial based transducer and a powerful ultrasonic generator providing efficient high level tabletop cleaning. With a cleaning duration of 1 ~ 99 mins efficient intensive cleaning of instruments and products is done making them contamination, rust and germ free. Its key feature is the variance of using it at 28 KHz for gross rinse to 40 KHz for intensive rinse



UV-Visible Spectrophotometer

UV-Visible Spectrophotometer LUS-B15 is a high sensitive double beam spectrophotometer with a wavelength of 190 to 1100 nm for absorbance spectra of chemical and biochemical compounds. Equipped with a bandwidth of 2 nm for peak resolution, it works on detection of light intensity between reference and test sample. The highly stable optics and silicon photodiode detector measures the sample and reference simultaneously optimizing the measurement accuracy. Built-in ARM system for high accuracy and low stability.



Vacuum Pump

Rotary Vane Vacuum Pump LRVP-A10 is designed with unique lubrication system, built-in oil pump and with a large oil volume capacity ranging from 0.5 L to 4.0 L. In addition to providing smooth, pulse-free air flow, these oil sealed rotary displacement pump are compact and easy to install and operate, have low starting and running torque requirements, produce minimal noise or vibrations and are capable of long, service-free life.



Viscometer

Viscometer LVM-B10 is used to determine a fluid’s internal flow resistance or viscosity. This viscometer has bright, easy to read LCD digital display. The viscometer is useful in any area that requires the study of flow of liquids properties. It is user-friendly, and portable in nature.



FTIR-Spectrometer

FTIR Spectrometer LIR-A10 is versatile, innovative, and intuitive, providing superior quantitative and qualitative information for routine analysis of solids, liquids, and gases. It has spectral range of 7800 to 350cm-1 and high S: N ratios and can provide SNR up to 15000:1.



Atomic Absorption

Atomic Absorption Spectrophotometer comprises of high performance and a wide spectral range photomultiplier tube. Incorporation of Czerny-Turner monochromator helps in selection of specific lights to allow determination of specific elements. It is equipped with gas leakage alarm which shutdowns the system as a safety measure. It is highly recommended spectrophotometer to analyze the smallest amount of element from the mixture, also in forensics and chemistry, biological science to detect toxic elements from blood and drug samples.



Cell Washing Centrifuge

Cell Washing Centrifuge LCW-A10 is a high-performance serofuge that can be used to perform cell-washing procedures safely and reliably. Steps are easy to monitor and easy-to-read digital LED display enables simple, user-friendly operation. It gives reproducible blood cell washing results up to 12 tubes per run.



Microscopes

Upright Metallurgical microscopes LMM-B11 with siedentopf trinocular head design, infinite optical system, reflected & transmitted Kohler illumination system meets performance demands of metal, plastic, electrical circuits & engineering industry. Its superior coaxial course and fine focusing tension adjustment knobs helps in better examination of samples.



Horizontal Autoclaves

Horizontal Laboratory Autoclave LHA-B10 is a microprocessor controlled automatic autoclave. It has a capacity of 150 L and a maximum working temperature of 134 °C. Equipped with safety features like automatic shutoff preventing overload of current, auto protection against raised temperature and pressure making a reliable and user-friendly device.



Density Meter

Density Meter LLDM-A10 is a unit that allows the data to be read directly with high measuring accuracy. It follows Archimedes principle of measurement. Measures volatile liquid, corrosive liquid, vicidity liquid, strong acid, and strong lye liquid quickly. Non cumbersome operation. It adopts the completed special windproof and dustproof cover, which makes the structure convenient and durable



CP Spectrometer

ICP Spectrometer LICP-A11 detects micro and macro elements using argon plasma with an analyzing rate of 15 elements per minute. Results can be achieved with lower levels of detection for qualitative and quantitative analysis. Detection of liquid flow from the spray chamber by optical drain sensor offers exceptional sensitivity and accuracy. Accurate signal-background ratio is attained by advanced control system.



SKYRAY INSTRUMENTS

EDXRF 

 The Pocket III XRF comes in three various Models. The Pocket III can be calibrated to work for various applications. Mineral Exploration and Surveying, Alloy Analysis, Precious Metals Analysis, ROHS/WEEE Analysis. For further information, please view our brochure or request a quote.

EEDX3200S XRF Spectrometer

 

Introduction

 Recently the restriction on the amount of sulfur present in petrochemical products especially oils such as gasoline, diesel and lubricating oil has become a critical environmental concern. When too much sulfur is present in the fuels, it reacts with the air dissolved in fuel and reduces its stability; furthermore, in the burning process of fuels, sulfur decreases the transformation of the toxic discharges and results in the erosion of the engine’s fuel system. Sulfur Dioxide is also generated in the burning process and it possesses a substantial threat to the natural environment. The ASTM D4294 Standard test is the testing process that utilizes an EDXRF Spectrometer. The EDX3200S was specifically designed for this test method.

 

Technical Specifications

  • Measurable Elements: Sulfur (P – U)
  • Analysis Range: 5ppm – 99.99%
  • Detection Limit: 15ppm (5ppm when helium gas is filled)
  • Standard Deviation when > 100ppm: 15ppm
  • Standard Deviation when < 100ppm: 10ppm
  • Tests: Liquids Only
  • Ambient Temperature: -20°C – +50°C
  • Power Input: 110V AC or 220V AC
What do you get?
  • EDX3200S Energy Dispersive X-ray Fluorescent Spectrometer
  • Necessary Wiring
  • Computer – Printer – 20″ Monitor – FREE
  • Silver and RoHS Standard Samples
  • Proprietary Software – FREE
  • 1 Year Limited Warranty

SKYRAY INSTRUMENTS

EDXRF 

 The Pocket III XRF comes in three various Models. The Pocket III can be calibrated to work for various applications. Mineral Exploration and Surveying, Alloy Analysis, Precious Metals Analysis, ROHS/WEEE Analysis. For further information, please view our brochure or request a quote.

EEDX3200S XRF Spectrometer

 

Introduction

 Recently the restriction on the amount of sulfur present in petrochemical products especially oils such as gasoline, diesel and lubricating oil has become a critical environmental concern. When too much sulfur is present in the fuels, it reacts with the air dissolved in fuel and reduces its stability; furthermore, in the burning process of fuels, sulfur decreases the transformation of the toxic discharges and results in the erosion of the engine’s fuel system. Sulfur Dioxide is also generated in the burning process and it possesses a substantial threat to the natural environment. The ASTM D4294 Standard test is the testing process that utilizes an EDXRF Spectrometer. The EDX3200S was specifically designed for this test method.

 

Technical Specifications

  • Measurable Elements: Sulfur (P – U)
  • Analysis Range: 5ppm – 99.99%
  • Detection Limit: 15ppm (5ppm when helium gas is filled)
  • Standard Deviation when > 100ppm: 15ppm
  • Standard Deviation when < 100ppm: 10ppm
  • Tests: Liquids Only
  • Ambient Temperature: -20°C – +50°C
  • Power Input: 110V AC or 220V AC
What do you get?
  • EDX3200S Energy Dispersive X-ray Fluorescent Spectrometer
  • Necessary Wiring
  • Computer – Printer – 20″ Monitor – FREE
  • Silver and RoHS Standard Samples
  • Proprietary Software – FREE
  • 1 Year Limited Warranty

Print Friendly, PDF & Email